Purchase Hotline 15207551155
After sales hotline 15207551155

Free samples, free customized after-sales guarantee

搜索
搜索
这是描述信息
/
/
文胸液体硅胶
搜索
Search
这是描述信息
All categories

Contact us

Tel:

Q Q: 

E-mai: 

Address:  Longgang District, Shenzhen

文胸液体硅胶

Product serial number
Product description
Parameters

文胸液体硅胶简介:

文胸液体硅胶是一种加成型液体硅胶,采用的是铂金催化剂环保材料,因此是一款环保无毒硅胶,也称胸罩硅胶、人体硅橡胶。 A和B两组份配比,混合比例1:1,可室温固化,也可加温固化。近几年,硅胶文胸、硅胶胸罩越来越受欢迎,得益于硅胶文胸比海绵文胸更环保,更透气,更健康的明显优势。

 

文胸液体硅胶用途:

文胸液体硅胶不但是女性硅胶胸罩的高档材料、环保材料,还可用于制作疤痕贴、魔术贴、退烧贴等。

文胸液体硅胶的特性

(1)触感柔软、不变形、回弹力好。

(2)具有的生理惰性,无气味、透气性能好、线收缩率低。

(3)操作方便、易灌注;即可室温固化也可加温固化。  

(4)不受制品厚度限制,耐温在-65℃ -200下可长期使用并保持其柔软弹性性能。

(5)操作方便、易灌注;通过 SGSRoSHFDA 环保无毒食品级认证。

            

红叶硅胶 -- 文胸液体硅胶 HY-9405 参数:

 

备注以上参数仅为本型号 HY-9405的参数,其他型号的参数未显示; 硬度、粘度、操作时间、可随客户需求来特别调整提供。 

                                                                                                     

文胸液体硅胶使用方法:

A、B组份按1:1混合均匀,经真空脱泡后即可浇灌,操作时间视温度而定,一般为30分钟左右,硫化时间(室温)2-3小时,加温80-120°C可在数十分钟内硫化。根据用户需求可配成红、黄等其他颜色。

 

胸液体硅胶注意事项:

1.由于加成型硅胶易反应,在用过缩合型硅胶胶料的一切东西再用加成型硅胶时候要清洁干净,以免胶体不固化。

2.在测试之前不可随便往加成型胶里补加颜色或粉体等,以免使胶发生催化剂反应不固化现象。

3.在A、B胶料混合时要严格按照配比要求进行配料,配比不准确,硬度会发生变化。

4.本品为铂催化剂,水、杂质、有机锡催化剂、酸、碱等其它含硫、磷、氮的有机物可影响胶的固化,使用时不能混入或接触这些物质.

 

文胸液体硅胶常规包装:

40公斤/套(A组份20公斤+B组份20公斤 )

400公斤/套(A组份200公斤+B组份200公斤 )

 

 

如果您以前没有任何使用经验,或者遇到其他无法解决的问题,可以联系我们的在线服务人员,还可以发送电子邮件到hyd@szrl.net

 全国咨询热线:18988789544

We could not find any corresponding parameters, please add them to the properties table
Previous
Next

产品中心

  • Silicone gel
    Silicone gel
    0.00
    Silicone gel can be used for filling, coating of electronic components, transparent and soft gaskets, etc.
  • Tank Filter Seal Jelly Glue
    Tank Filter Seal Jelly Glue
    0.00
    Tank filter tank glue Jelly glue Mainly used in tank filter to seal moisture and shock
  • Lipstick Mold Liquid Silicone
    Lipstick Mold Liquid Silicone
    0.00
    Lipstick mold silicone application: Environmentally friendly silicone is used in the production of lipstick molds! At the same time, it can also be used in the mold making of DIY product molds, candy molds, brown sugar molds, hot pot bottom material molds, precision lost wax casting molds, mechanical precision casting molds and other products. It can also be used in the production of molds/finished products for aerospace, aerospace accessories and other products.

Contacts

Tel: 89948454 / 83212351
Fax: 0086-755-89948030
Q Q:  2355542596
Email:
hyd@szrl.net
Address: building a, No. 3, Hongling 1st Road, Liulian Shibi Industrial Zone, Pingdi Town, Longgang District, Shenzhen

Pay attention to us

关注我们
X微信咨询

截屏,微信识别二维码

Copyright & ©2022 Shenzhen JR Technology Co., Ltd  粤ICP备2023043941号  SEOTag

Powered by www.300.cn