Human body mold silicone application:

   Human body mold silicone is a very popular human body silicone, which can not only be used to make silicone artificial limbs, silicone prostheses, silicone artificial skin, silicone artificial people, silicone artificial organs, silicone masks and other silicone artificial human supplies, but also can be used to make Silicone robots, silicone models, silicone beauties, etc.

                                                                              Human prosthetic silicone features:

1、超高仿真性，不管是肤色、硬度、触感还是柔软度，都与真人有超高的相似性，是所有仿真人制品的首选材料；

2、环保无毒、食品级，通过SGS、FDA食品级认证。   

3、温度范围在-65℃-200℃下可长期使用并保持其柔软弹性性能。

4、具有优良的电性能和化学稳定性，耐水、耐臭氧、耐气候老化，无腐蚀性，具有生理惰性，无毒无味，线收缩率低，易操作等特点。 

红叶硅胶 -- 人体假肢硅胶 HY-E615参数表：  

备注: 以上参数仅为此型号 HY-E615的参数，其他型号的参数未显示； 如有特殊需求请与我司联系；固化后硬度、粘度、操作时间、可随客户需求来特别调整提供。

人体模具硅胶的操作方法：
A、B组份按1:1混合均匀，经真空脱泡后即可浇灌，操作时间视温度而定，一般为30分钟至2小时，硫化时间(室温)2-3小时，加温80-120°C可在数十分钟内硫化。根据用户需求调配颜色、硬度、粘度、操作时间、固化时间等。

Instructions for use of human body mold silicone :

1. Since the addition type silica gel is easy to react, everything that has used the condensation type silica gel compound should be cleaned before using the addition type silica gel to avoid any reaction.

2. Before the test, do not add color or powder to the addition glue, so as not to cause the glue to react with catalyst and not cure.

3. When mixing A and B rubber compounds, the ingredients should be strictly in accordance with the proportioning requirements. If the proportioning is not accurate, the hardness will change.

4. This product is a platinum catalyst. Water, impurities, organic tin catalysts, acids, alkalis and other organic substances containing sulfur, phosphorus and nitrogen can affect the curing of the glue. Do not mix or contact these substances during use.

If you have no previous experience, or encounter other problems that cannot be solved, you can contact our online service staff, or send an email to hyd @szrl.net

 National hotline: 189-8878-9544 136-8265-7631