Ceramic pad printing paste pad printing silica gel is applied to the pad printing patterns ofceramic products, electronic chips, plastic products,electroplating products,trademarks, andirregularproductpatterns. The liquid pad printing silicone is made into a pad printing head,and the pattern on the steel plate is usedas a carrier by the pad printing head, and then the pattern on the steel plate is transferredtothesubstrate. Ceramic pad printing paste pad printing silicone advantages: 1. Low colloidal viscosity, good fluidity2. No shrinkage, good oiling, and clear printing pattern

3. The glue is fine, the resilience is good, and the number of times of pad printing is  

ceramic pad printing paste. Pad printing silicone operation process :
1. Clean the glue head mold with detergent water , apply a release agent, and place it well. 2 . , Pour the pad printing glue and silicone oil into the measuring cup according to the proportion, stir evenly, add the curing agent and then fully stir evenly . 3. Pour the mixed glue into the glue head mold in one direction 4. Cover the wooden board ( According to production needs) , the rubber head can be demolded after 3-4 hours (Note: The amount of silicone oil that needs to be added is determined according to the pattern and size of the pad printing product, which can be determined by the amount of silicone oil added. to adjust the desired hardness .)