Tank glue is also called jelly glue, tank sealant, and tank jelly glue .  It is composed of A and B two-component liquid glue, usually A component is transparent liquid, B component is blue (color can be adjusted according to customer requirements), safe and environmentally friendly, high toughness, excellent sealing effect after curing, is a variety of liquid glue The first choice for trough high-efficiency filters, high-efficiency air supply devices, electronic components, power modules and other potting materials!

The main purpose of liquid tank glue

The liquid tank sealant is mainly used for the sealing of liquid tank type high-efficiency air filters, optical electronics, LCD liquid crystal manufacturing and precision electronic components, etc., and plays a protective role such as sealing, moisture-proof, shock-proof and insulation. This product has good adhesion to aluminum, galvanized sheet, stainless steel, etc. It is also widely used in plane bonding, sealing and repairing under high temperature conditions , such as special potting glue for air filters, high temperature ovens, high temperature Bonding and sealing of high temperature equipment such as air filters and induction cookers.

Performance characteristics of liquid tank adhesive products

Excellent chemical stability, safety and environmental protection, high toughness, moderate hardness and good elasticity recovery; excellent weather resistance, corrosion resistance, waterproof, moisture-proof, high temperature and low temperature resistance, no deformation; Stress without cracking, with good self-recovery sealing effect.

 1. Low viscosity, good perfusion;

 2. It can be cured at room temperature or heated;

 3. Good viscosity and softness;

 4. Good sealing, no oil after curing;

 5. This product does not produce any by-products in the curing reaction, and can be applied to the surface of PC (Poly-carbonate), PP, ABS, PVC and other materials and metals.

How to operate liquid tank glue

1. Before mixing, firstly mix components A and B in their respective containers fully and evenly.   

2. When mixing, the weight ratio of A component: B component = 1:1 should be observed.  

3. After mixing evenly, defoaming at 0.08MPa for 3 minutes. It can be directly poured into the aluminum tank of the tank filter. 

4. The temperature given in the technical parameter table should be maintained before and after curing when the liquid tank rubber compound is used. The curing speed of the silicone rubber compound is affected by the curing temperature. It can be cured into a gel in 3-8 hours at room temperature. It takes a long time to cure in winter. It is recommended to use heating to cure, 20 minutes at 80 ~ 100 ℃, and about 8 hours at room temperature .

Precautions for tank glue

1. The liquid tank rubber material should be sealed and stored. The mixed rubber should be used up at one time to avoid waste.  

2. This product is a non-dangerous product, but do not enter it and eyes, if you are not careful, it can be washed with clean water.  

3. After being stored for a period of time, the silica gel may be delaminated. Please stir well before use, it will not affect the performance.  

4. Contact with the following chemical substances will make the product not solidify. During use, please avoid contact with the following substances.

If you have no previous experience in mold opening, you can log in to our company website to view detailed silicone mold opening video tutorials .

If you encounter other problems that cannot be solved, you can log in to our company website for inquiries related to silicone application technology, or you can contact our online service staff, or send an email to hyd@szrl.net

standard packaging:　 

Component A: 20, 200KG/barrel
Component B: 20, 200KG/barrel

Transported as non-dangerous goods, storage period of 1 year, airtight, acid-base and impurity-proof.

 National Consulting Hotline: 189-8878-9544