Purchase Hotline 15207551155
After sales hotline 15207551155
Free samples, free customized after-sales guarantee
Contact us
Tel:
Q Q:
E-mai:
Address: Longgang District, Shenzhen
Resin handicraft mold silicone introduction :
Resin handicraft mold silica gel, namely special mold silica gel for resin handicrafts, is a kind of condensed liquid silicone rubber. Component A is a flowable liquid, and component B is a curing agent (vulcanizing agent). After mixing the two, it can be quickly formed and the operation is simple.
Industry uses of resin handicraft mold silicone :
It is suitable for the manufacture of silicone molds for various large, medium and small pieces, precise and small or complex resin handicrafts with patterns, such as POLYSTER , epoxy resin (EPOXY), Pu resin and other craft gifts and molds for products with fine patterns. , It can also be used for the complex mold and precision mold manufacturing of lighting, candles, handmade soap and other handicrafts.
Advantages of resin handicraft mold silicone :
①High temperature resistance, generally 180℃-300℃, if you add special reagents, it can withstand higher temperature, because the unsaturated resin will release a lot of heat during the curing process, which is easy to damage the silicone mold. Therefore, the advantage of Hongye silica gel is that it is more Good high temperature resistance can greatly save production costs;
②The viscosity of the liquid silicone, the hardness after curing of the silicone, the operation time, curing time, color, etc., can be adjusted according to customer requirements, and customized production of silicone rubber for you;
③ The shrinkage rate is low, the shrinkage rate of the condensation type silica gel is less than 0.3%, and the shrinkage rate of the addition type silica gel is less than 0.1%;
④ The tensile force and tear resistance are good, the silicone mold made is not deformed, and it is more durable, so the number of mold turning is also high.
Instructions on the operation method of resin handicraft mold silicone :
If the customer needs to make large products, such as splitting molds, it is necessary to use liquid mold silicone with high hardness as the mold. On the contrary, for complex patterns and fine and tiny molds, such as overmolding, soft liquid mold silicone must be used. to make a model.
The amount of curing agent added can be determined according to the actual requirements of customers, requiring rapid drying and rapid mold release, and correspondingly more curing agent should be added. Conversely, if you need a slower demoulding, add a little less hardener (but no more than 5% hardener).
(Note: The company's products do not advocate adding silicone oil, special soft silicone molds or complex patterns and precision small, you can add 5%-10% silicone oil to adjust the softness of the silicone mold for demoulding.)
Hongye silicone - handicraft mold silicone HY-625 parameters:
Remarks : The above parameters are only the parameters of this model HY-E625, and the parameters of other models are not shown; if you have special needs, please contact our company; after curing, the hardness, viscosity, and operating time can be specially adjusted according to customer needs.
The reaction of the ratio of silica gel and curing agent is as follows:
1. When the amount of curing agent is 1%, the colloid will still flow in 2.5 hours, and it can be demolded in 6-8 hours.
2. When the amount of curing agent is 2%, the colloid will still flow in 50 minutes to 1 hour, and it can be demolded in 2 to 3 hours.
3. When the amount of curing agent is 3%, the colloid will still flow in 28-30 minutes, and it can be demolded in 1.5-2 hours.
4. When the amount of curing agent is 4%, the colloid will flow in 10-15 minutes, and it can be demolded in 1-1.5 hours.
If you have no previous experience in mold opening, you can also log in to our website to view detailed silicone mold opening video tutorials .
If you encounter other problems that cannot be solved, you can contact our online service staff or send an email to hyd@szrl.net
National Consulting Hotline: 189-8878-9544
产品中心
Contacts
Tel: 89948454 / 83212351
Fax: 0086-755-89948030
Q Q: 2355542596
Email: hyd@szrl.net
Address: building a, No. 3, Hongling 1st Road, Liulian Shibi Industrial Zone, Pingdi Town, Longgang District, Shenzhen
Pay attention to us
截屏,微信识别二维码
Copyright & ©2022 Shenzhen JR Technology Co., Ltd 粤ICP备2023043941号 SEOTag
Powered by www.300.cn