Application characteristics of Buddha statue handicraft mold silicone :

1. The silicone mold made has the characteristics of light texture, good elasticity, high tear resistance, easy operation and demoulding;

2. It is composed of A and B two-component liquid glue, which can be quickly cured at room temperature, with excellent flow properties and easy operation. Adding 2%-3% of curing agent at room temperature, it can be operated within 30 minutes, and after 3-5 hours will take shape;

3. Better fluidity, low viscosity, easy operation, low shrinkage, and reusable;

4. Good tensile strength, acid and alkali resistance, aging resistance, high tear strength, and the silicone mold can not be deformed.

Instructions for use of Buddha statue handicraft mold silicone :

1. For large-scale products, a split mold or brush mold is generally used, and liquid mold glue with high hardness is used to open the mold; on the contrary, for complex patterns and fine and tiny products, generally fill the mold and use soft liquid mold silicone to make a model.

2. The amount of curing agent added can be determined according to the actual requirements of customers. If fast drying and rapid mold release are required, more curing agent should be added accordingly; on the contrary, if slower mold release is required, less curing agent (but curing The dosage of the agent should not exceed 5% at most).

(Note: The company's products do not advocate adding silicone oil, special soft silicone molds or complex patterns and precision small, you can add 5%-10% silicone oil to adjust the softness of the silicone mold for demoulding.)

Hongye silicone - mold silicone HY-630 parameters:

Remarks : The above parameters are only the parameters of this model HY-630, and the parameters of other models are not shown; if you have special requirements, please contact our company; after curing, the hardness, viscosity, and operating time can be specially adjusted and provided according to customer needs.

Buddha statue handicraft mold silicone precautions :

1. The amount of curing agent should be determined according to the temperature, and it should be reduced if the temperature is high. If the curing agent is used too much, the mold will become hard and brittle; if the curing agent is used too little, the operation time will be prolonged.

2. In order for your silicone mold to achieve the best use effect, please store the mold for at least 24 hours before use.　

If you have no previous experience in mold opening, you can also log in to our website to view detailed video tutorials on silicone mold opening .

If you encounter other problems that cannot be solved, you can contact our online service staff, and you can also send an email to h yd@szrl.net