Buddha statue mold liquid silicone introduction :

Buddha statue mold liquid silicone is a kind of two-component liquid silicone rubber . Hongye mold silicone rubber is designed into thousands of fields. Each material and product has different requirements for mold silicone rubber. Buddha statue mold silicone is mainly A mold glue recommended for Buddha statue products. Because the patterns and shapes of the Buddha statues are relatively complex, and the textures are very fine, there are many grooves. In response to this phenomenon, this silicone can better reproduce the Buddha statue products perfectly.

Buddha statue mold liquid silicone application fields :

Buddha statue liquid silicone is mainly used for the production of imitation jade statue mold, ceramic craft Buddha statue mold, resin craft ornament Buddha statue, glass fiber reinforced plastic sculpture Buddha statue, relief Buddha statue and other silicone mold products . It is also often used in traditional handicraft Buddha statues , Guanyin plaster statue molds, character sculptures, film and television prop models, gypsum handicraft Buddha statue models and other products and fine mold manufacturing. Sculptures, fine fiberglass sculptures or sculpture products with complex patterns.  

Application characteristics  of Buddha statue mold liquid silicone :

1. Good tensile force and elasticity, high tear strength, and long service life of the mold;
2. Good weather resistance, many times of overturning, and low linear shrinkage;
3. It has no deformation, high temperature resistance, acid and alkali resistance , The characteristics of non-expansion;
4. It has perfect reproduction effect for various sizes, complex shapes, fine patterns or simple products, and ultra-high mold turning times, saving time, labor and cost.
  

Buddha statue mold liquid silicone instructions for use:

(Note: The company's products do not advocate adding silicone oil, special soft silicone molds or complex patterns and precision small, you can add 5%-10% silicone oil to adjust the softness of the silicone mold for demoulding.)

Hongye Silicone —— Mold liquid silicone HY-635 technical performance parameters:

Remarks :  The above parameters are only the parameters of this model HY-635, and the parameters of other models are not shown; if you have special needs, please contact our company; after curing, the hardness, viscosity, and operating time can be specially adjusted and provided according to customer needs.

Buddha statue mold liquid silicone precautions:

1. The amount of curing agent should be determined according to the temperature, and it should be reduced if the temperature is high. If the curing agent is used too much, the mold will become hard and brittle; if the curing agent is used too little, the operation time will be prolonged.

2. In order for your silicone mold to achieve the best use effect, please store the mold for at least 24 hours before use.　

If you have no previous experience in mold opening, you can also log in to our website to view detailed video tutorials on silicone mold opening .

If you encounter other problems that cannot be solved, you can contact our online service staff or send an email to hy d@szrl.net

 National Consulting Hotline: 189-8878-9544