Jewelry Lost Wax Casting Mold Silicone Lost Wax Casting Addition Silicone   Product Introduction

·This product is a two-component addition type silicone material, which can be cured at room temperature or heated.

Jewelry lost wax casting mold silicone product features

Low shrinkage rate, no low molecules are released during the cross-linking process, so the volume remains unchanged, and the shrinkage rate is less than 0.1%

·It is not affected by the thickness of the product and can be deeply cured

·Excellent high temperature resistance, the temperature can reach 300-500 degrees

Food grade, non-toxic and tasteless, passed FDA food grade certification

·High tensile and tear resistance, many times of overturning

Good fluidity, easy to pour; it can be cured at room temperature or heated, and it is easy to operate

Jewelry lost wax casting mold silicone usage and precautions

·Mix the two components A and B evenly at 1:1 by weight, and pour them after vacuum defoaming. Room temperature (28 degrees) 30 minutes of operation time, 2-3 hours of complete curing; heating 60-120 degrees, can be completely cured within tens of minutes.

· Separate the container from other silica gels during operation, and use the room temperature silica gel tools to handle this silica gel.

·Before use, do a skin test on the mold to see if it will cure, and then put it into use

Jewelry Lost Wax Casting Mold Silicone Packaging Specifications

·Packing specification: A: 25kg/200kg B: 25kg/200kg, iron drum

Jewelry lost wax casting mold silicone storage and transportation

Storage period: 12 months (in a sealed state, stored in a cool and dry place)