Lipstick silicone molding molds have different sparks in the production of traditional aluminum molds and lipsticks. Therefore, various DIY silicone lipstick molds have entered the public's field of vision. In aluminum molds and silicone lipstick molds, if you choose Woolen cloth?

     In general, the cost of aluminum molds is much higher than that of silicone molds. For production efficiency, aluminum molds must be much faster than silicone molds. To meet the needs of various styles of lipsticks in the market, silicone molds are more suitable. As mentioned above, it is particularly suitable to select silica gel as the raw material of the lipstick mold.

Lipstick mold silicone advantages:

1. The shrinkage rate is small , and the forming mold is not deformed due to temperature

2. Not limited by the thickness of the forming mold , heating can quickly cure and form

3. It has high temperature resistance and will not be affected during the pouring process of lipstick high temperature materials

4. Environmentally friendly and tasteless, passed FDA food grade certification

5. High tearing performance, such as the quality of the silicone pacifier meets the requirements of many times of overturning and good effect

6. AB glue has good fluidity and easy to pour after mixing; it can be cured at room temperature or heated

Lipstick mold silicone operation method:

1. The two groups of rubber compounds A and B are mixed evenly at 1:1 by weight , and are formed by vacuum defoaming and pouring . ( The operating time is 30-35 minutes at a constant temperature of 25°C, and the curing time is 2-3 hours (Note: It can also be cured by heating , and the curing time can be shortened at 60-120 )

2. Avoid containers that have used condensed silica gel during operation, and choose new tools or tools that are cleaned 3-5 times with detergent water (Note: Special attention should be paid, operators should not smoke)

Lipstick mold silicone precautions:

1. The selected rubber material is environmentally friendly addition type silica gel, which needs to be mixed with AB glue at 1:1;

2. Do not smoke during operation, and avoid materials containing heavy metals, halogens, etc., otherwise it will cause the colloid to react, resulting in the phenomenon of "poisoning" , resulting in the phenomenon that the silica gel does not solidify .