Purchase Hotline 15207551155
After sales hotline 15207551155
Free samples, free customized after-sales guarantee
Contact us
Tel:
Q Q:
E-mai:
Address: Longgang District, Shenzhen
Basic introduction of gypsum craft mold silicone :
Gypsum craft silica gel is a two-component liquid silicone rubber. The A component is a fluid liquid glue, and the B component is a curing agent (vulcanizing agent). After mixing the two, it can be quickly formed and the operation is simple. It can be cured at room temperature or at elevated temperature.
The main uses of gypsum handicraft mold silicone :
Gypsum craft mold silicone is mainly used for the replication of various large, medium and small gypsum handicrafts , gypsum lines, furniture decorations , architectural decoration crafts and the production of silica gel molds for precision pattern craft products; it is also suitable for European-style components of other materials, such as The production of silicone molds such as Roman columns, cultural stones, artificial stones, rockeries, garden decorations, gypsum cement mixtures, stone sculptures , etc.; the application fields of mold silicone are very wide, and can also be used for resin handicrafts, simulated animal and plant sculptures and other products. .
The main performance characteristics of gypsum process mold silica gel :
①Compared with resin molds, plaster molds and aluminum molds, the elasticity of silicone molds is the best, so demolding does not hurt the original magic species, and the effect of copying and turning the mold is the best, which can make the detailed texture of the product perfect copied out;
② It has better resistance to hydrolysis, and is more suitable for mass-replication of products of various sizes and complex patterns and shapes;
③Low viscosity, better strength and better fluidity;
④ Because no low-molecular by-products are released during vulcanization, the vulcanization is synchronized from top to bottom and from inside to outside, which can be deeply vulcanized. , high temperature) the phenomenon that the mold is revisited and degraded;
⑤Lower linear shrinkage and low viscosity, better fluidity.
Hongye silicone - mold silicone HY-620 parameter table :
Remarks : The above parameters are only the parameters of this model HY-620 , and the parameters of other models are not shown; if you have special needs, please contact our company; after curing, the hardness, viscosity, and operating time can be specially adjusted and provided according to customer needs.
Precautions for the use of silica gel for plaster craft molds :
1. The amount of curing agent should be determined according to the temperature, and it should be reduced if the temperature is high. If the curing agent is used too much, the mold will become hard and brittle; if the curing agent is used too little, the operation time will be prolonged.
2. In order for your handicraft silicone mold to achieve the best use effect, please store the mold for at least 24 hours before use .
If you have no previous experience in mold opening, you can also log in to our website to view detailed silicone mold opening video tutorials .
If you encounter other problems that cannot be solved, you can contact our online service staff or send an email to hyd@szrl.net
National Consulting Hotline: 189-8878-9544
产品中心
Contacts
Tel: 89948454 / 83212351
Fax: 0086-755-89948030
Q Q: 2355542596
Email: hyd@szrl.net
Address: building a, No. 3, Hongling 1st Road, Liulian Shibi Industrial Zone, Pingdi Town, Longgang District, Shenzhen
Pay attention to us
截屏,微信识别二维码
Copyright & ©2022 Shenzhen JR Technology Co., Ltd 粤ICP备2023043941号 SEOTag
Powered by www.300.cn