Purchase Hotline 15207551155
After sales hotline 15207551155
Free samples, free customized after-sales guarantee



Contact us
Tel:
Q Q:
E-mai:
Address: Longgang District, Shenzhen
Basic instructions for gypsum cement mold glue :
Gypsum cement mold glue is mainly used for the production of silicone molds for gypsum, cement or gypsum-cement mixed materials, so as to meet the requirements of mass production and replication.
This kind of use is collectively referred to as mold silicone, mold glue, mold silicone rubber , mold-over silicone, over-molded silicone rubber, compound-molded silicone, compound-molded silicone rubber, etc.
Application fields of gypsum cement mold glue :
Gypsum cement mold glue is suitable for the production of silicone molds for medium and large batches of products. It can also be used for mass production of various sizes of gypsum cement products, handicrafts and sculptures.
The main performance characteristics of gypsum cement mold glue :
1. Mainly used for mass production of gypsum products, cement products, or gypsum-cement mixtures;
2. High-strength tear resistance, the silicone mold made is not deformed, resistant to high temperature, acid and alkali, and does not expand, so the number of times of mold turning is high, and some gypsum products can be turned over thousands of times;
3. Good resistance Climate resistance, low linear shrinkage, mold can be reused;
4. The tensile force and elasticity are good, and the service life of the mold is long;
5. The curing time and speed at room temperature and the hardness of the silica gel after hardening can be specially adjusted and produced according to the customer's product requirements, and the silica gel can be customized for you;
The operation method and selection of gypsum cement mold silica gel :
According to the different operation methods , the mold opening methods include package mold, brush mold (segment mold, three-dimensional mold, flat mold), and perfusion mold .
1. For gypsum cement products with a size of 10-20 cm, the markings are very precise and detailed. It is recommended to use low-hardness liquid silica gel for the filling operation.
2. For gypsum cement products with a size of 30-50 cm, the markings are precise and detailed, it is recommended to use 30-35 degrees of silica gel for the brushing operation.
3. Gypsum cement products with a size of 30-50 cm, simple spots and very thin thickness, it is recommended to use 25-30 degrees of silica gel for the filling operation.
4. Gypsum cement products with a size of more than 60 cm, regardless of whether the markings are fine or not, generally use 40-50 degrees of silica gel for brushing operation; unless the thickness of the product is relatively thin, the filling operation can be used.
Main technical parameters of Hongye silica gel - gypsum cement mold glue HY-625:
Remarks : The above parameters are only the parameters of this model HY-625, and the parameters of other models are not shown; if you have special requirements, please contact our company; after curing, the hardness, viscosity, and operating time can be specially adjusted and provided according to customer needs.
Gypsum cement mold silicone precautions:
1. The amount of curing agent should be determined according to the temperature, and it should be reduced if the temperature is high. If the curing agent is used too much, the silicone mold will become hard and brittle; if the curing agent is used too little, the operation time will be prolonged.
2. In order for your silicone mold to achieve the best use effect, please store the mold for at least 24 hours before use.
If you have no previous experience in mold opening, you can also log in to our website to view detailed silicone mold opening video tutorials .
If you encounter other problems that cannot be solved, you can contact our online service staff, and you can also send an email to h yd@szrl.net
National Consulting Hotline: 189-8878-9544
产品中心
Contacts
Tel: 89948454 / 83212351
Fax: 0086-755-89948030
Q Q: 2355542596
Email: hyd@szrl.net
Address: building a, No. 3, Hongling 1st Road, Liulian Shibi Industrial Zone, Pingdi Town, Longgang District, Shenzhen
Pay attention to us


截屏,微信识别二维码
Copyright & ©2022 Shenzhen JR Technology Co., Ltd 粤ICP备2023043941号 SEOTag
Powered by www.300.cn